Call Us Today: (800) 227-4292 | E-mail: basicwire@basicwire.com
  GO
Switchboard WiresBare Copper WiresBuilding WiresInstrumentation Cables600V Multi-Conductor Control Tray Cables600V Multi-Condutor Power Cables and VFD Cables600V Interlocked Armored Instrumentation Cables600V Interlocked Armor Control Cables600V-35kV Interlocked Armor Power CablesFlexible Portable CordsFlexing Portable Mining CablesMV-105 Power CablesIN STOCK Belden and Belden Equals or Similar         
 
 
 
                                     
All Categories > MV-105 Power Cables > Type EPR Power Cables 15kV-1C > View Items  

Type EPR Power Cables 15kV-1C

Check up to five results to perform an action.

APPLICATION:
A-    Where NEC jurisdiction applies; as 15000 volts shielded power cable, Type MV-105, for use at conductor temperature not exceeding 105 deg.C. in wet or dry locations, when installed in accordance with the National Electrical Code.
B-  Otherwise, for general purpose applications in wet or dry locations, in circuits not exceeding 15000 volts, phase to phase, at conductor temperatures not exceeding 105 deg.C. for normal, 130 deg.C. for emergency overload, and 250 deg.C.circuit conditions. Suitable for installation in conduit, trays, troughs, ducts, aerial, and direct burial applications.
 
CONSTRUCTION: 
Stranded copper conductor, semi-conducting layer, EPR insulation, semi-conducting layer, helically applied copper tape shield, black PVC jacket overall, surface printed. 
   
STANDARDS:
*   Conforms to AEIC CS8.
*   Type MV-105 power cable, 15,000 volts.
*   Overall jacket suitable for Sunlight Resistant and Direct Buried applications.
*   Sizes 1/0 AWG and larger designed to pass the IEEE-383  flame test and are suitable “For CT Use.”
*   Sizes 250 MCM and larger designed to pass the IEEE-1202  flame test.
*   Cables conform to ICEA S-93-639 and ICEA S-97-682.

 



Search Items



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

 DOWNLOADS 

Type EPR single
(JPG, 113KB)

TYPE EPR POWER 15kV-1c SPEC. SHEET
(PDF, 123KB)

Compare Items
   
  Results 1 - 11 of 11 1 

Part #

Conductor Size

No. of Strands

Insulation Thickness (mils)

Jacket Thickness (mils)

O. D. (in)

Weight (lbs/mft)

Conductor Color Coding Methods

13-1504 2 AWG 7 220 80 1.03 685 N/A
13-1505 1 AWG 19 220 80 1.07 760 N/A
13-1506 1/0 AWG 19 220 80 1.11 840 N/A
13-1507 2/0 AWG 19 220 80 1.15 955 N/A
13-1508 3/0 AWG 19 220 80 1.19 1115 N/A
13-1509 4/0 AWG 19 220 80 1.26 1275 N/A
13-1510 250 MCM 37 220 80 1.34 1465 N/A
13-1512 350 MCM 37 220 80 1.44 1840 N/A
13-1514 500 MCM 37 220 80 1.57 2395 N/A
13-1516 750 MCM 61 220 110 1.83 3415 N/A
13-1518 1000 MCM 61 220 110 2.01 4435 N/A
  Results 1 - 11 of 11 1 
Site created by ThomasNet Web Solutions
Basic Wire and Cable Company