Call Us Today: (800) 227-4292 | E-mail: basicwire@basicwire.com
  GO
Switchboard WiresBare Copper WiresBuilding WiresInstrumentation Cables600V Multi-Conductor Control Tray Cables600V Multi-Condutor Power Cables and VFD Cables600V Interlocked Armored Instrumentation Cables600V Interlocked Armor Control Cables600V-35kV Interlocked Armor Power CablesFlexible Portable CordsFlexing Portable Mining CablesMV-105 Power CablesIN STOCK Belden and Belden Equals or Similar         
 
 
 
                                     
All Categories > MV-105 Power Cables > Type EPR Power Cables 5kV/8kV-1C > View Items  

Type EPR Power Cables 5kV/8kV-1C

Check up to five results to perform an action.

APPLICATION:
A-    Where NEC jurisdiction applies; as 5000/8000 volts shielded power cable (133/100% insulation levels), Type MV-105, for use at conductor temperature not exceeding 105 deg.C. in wet or dry locations, when installed in accordance with the National Electrical Code.
B-  Otherwise, for general purpose applications in wet or dry locations, in circuits not exceeding 5000 volts, phase to phase, at conductor temperatures not exceeding 105 deg.C. for normal, 130 deg.C. for emergency overload, and 250 deg.C. circuit conditions. Suitable for installation in conduit, trays, troughs, ducts, aerial, and direct burial applications.
 
CONSTRUCTION:
Stranded copper conductor, semi-conducting layer, EPR insulation, semi-conducting layer, helically applied copper tape shield, black PVC jacket overall, surface printed.
 
STANDARDS:
*     Conforms to AEIC CS8.
*     Type MV-105 power cable, 5,000/8,000 volts (133/100% insulation levels).
*     Overall jacket suitable for Sunlight Resistant and Direct Buried applications.
*     Sizes 1/0 AWG and larger designed to pass the IEEE-383  flame test and are suitable “For CT Use.”
*     Sizes 250 MCM and larger designed to pass the IEEE-1202  flame test.
*     Cables conform to ICEA S-93-639 and ICEA S-97-682.

 



Search Items



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

 DOWNLOADS 

Type EPR single
(JPG, 113KB)

TYPE EPR POWER 5kV-1c SPEC. SHEET
(PDF, 126KB)

Compare Items
   
  Results 1 - 14 of 14 1 

Part #

Conductor Size

No. of Strands

Insulation Thickness (mils)

Jacket Thickness (mils)

O. D. (in)

Weight (lbs/mft)

Conductor Color Coding Methods

13-1005 8 AWG 7 115 60 0.61 160 N/A
13-1006 6 AWG 7 115 60 0.64 215 N/A
13-1007 4 AWG 7 115 60 0.72 350 N/A
13-1008 2 AWG 7 115 60 0.78 460 N/A
13-1009 1 AWG 19 115 60 0.82 565 N/A
13-1010 1/0 AWG 19 115 60 0.86 620 N/A
13-1011 2/0 AWG 19 115 80 0.94 755 N/A
13-1012 3/0 AWG 19 115 80 0.99 890 N/A
13-1013 4/0 AWG 19 115 80 1.05 1055 N/A
13-1014 250 MCM 37 115 80 1.10 1205 N/A
13-1016 350 MCM 37 115 80 1.21 1570 N/A
13-1018 500 MCM 37 115 80 1.36 2115 N/A
13-1021 750 MCM 61 115 80 1.54 2995 N/A
13-1022 1000 MCM 61 115 80 1.70 3870 N/A
  Results 1 - 14 of 14 1 
Site created by ThomasNet Web Solutions
Basic Wire and Cable Company